Customization: | Available |
---|---|
Material: | PVC |
Hardness: | Hard Tube |
Still deciding? Get samples of US$ 300/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. Resistant erode
PVC pipe has stable chemical property, which can resistant most of acid and alkali.
2. Service life long
Traditional pipe service life is 20-30 years. PVC pipe service life is at least 50 years at a set temperature and pressure.
3. Excellent sanitary performance
PVC pipe is produced by used Tin or Ca/Zn stabilizer, its sanitary performance is full according to GB/T17219 standard and Ministry of Health of the People's Republic of China related water criterion.
4. PVC pipe has better slotted (bored) rate, strong resistant pressure, larger cross flowing, and is the best choice replace steel and concrete slotted (bored) pipe in many fields.
5. Easy installing
PVC slotted (bored) pipe joint form: elastic seal ring joint, cement joint, also crew joint and flange joint. In additional, PVC-M pipe is density low, weight light, lower requirements for worker and construction equipment, construction cost also is lower compared concrete pipe, steel pipe.
6. Inside wall smooth, no furring, flowing easier, no block(n=0.008---0.009),excellent resistant bacteria. It can effectively guarantee pipes long time straightway. For turning over swash field, PVC-M pipes also easily wash clear.
1. High quality raw material, with premium hardened procedures for long life.
2. Full production chain to secure stable and prompt production leadtime.
pvc-m | pvc-o / pvc-u | ||||||
Specification (mm) | Pressure | Dimension (m) | Thickness (mm) | Specification (mm) | Pressure | Dimension (m) | Thickness (mm) |
50 | 1.0Mpa | 3.1 | 5 | 50 | 1.0Mpa | 3.1 | 5 |
50 | 1.25Mpa | 3.1 | 6 | 50 | 1.25Mpa | 3.1 | 6 |
50 | 1.6Mpa | 3.1 | 7.5 | 50 | 1.6Mpa | 3.1 | 7.5 |
63 | 1.0Mpa | 3.1 | 5 | 63 | 1.0Mpa | 3.1 | 5 |
63 | 1.25Mpa | 3.1 | 6 | 63 | 1.25Mpa | 3.1 | 6 |
63 | 1.6Mpa | 3.1 | 7.5 | 63 | 1.6Mpa | 3.1 | 7.5 |
75 | 1.0Mpa | 3.1 | 5 | 75 | 1.0Mpa | 3.1 | 5 |
75 | 1.25Mpa | 3.1 | 6 | 75 | 1.25Mpa | 3.1 | 6 |
75 | 1.6Mpa | 3.1 | 7.5 | 75 | 1.6Mpa | 3.1 | 7.5 |
90 | 1.0Mpa | 3.1 | 5 | 90 | 1.0Mpa | 3.1 | 5 |
90 | 1.25Mpa | 3.1 | 6 | 90 | 1.25Mpa | 3.1 | 6 |
90 | 1.6Mpa | 3.1 | 7.5 | 90 | 1.6Mpa | 3.1 | 7.5 |
110 | 1.0Mpa | 3.1 | 5 | 110 | 1.0Mpa | 3.1 | 5 |
110 | 1.25Mpa | 3.1 | 6 | 110 | 1.25Mpa | 3.1 | 6 |
110 | 1.6Mpa | 3.1 | 7.5 | 110 | 1.6Mpa | 3.1 | 7.5 |
125 | 1.0Mpa | 3.1 | 5.5 | 125 | 1.0Mpa | 3.1 | 5.5 |
125 | 1.25Mpa | 3.1 | 7 | 125 | 1.25Mpa | 3.1 | 7 |
125 | 1.6Mpa | 3.1 | 8 | 125 | 1.6Mpa | 3.1 | 8 |
140 | 1.0Mpa | 3.1 | 6 | 140 | 1.0Mpa | 3.1 | 6 |
140 | 1.25Mpa | 3.1 | 7.5 | 140 | 1.25Mpa | 3.1 | 7.5 |
140 | 1.6Mpa | 3.1 | 8.4 | 140 | 1.6Mpa | 3.1 | 8.4 |
160 | 1.0Mpa | 3.1 | 6.2 | 160 | 1.0Mpa | 3.1 | 6.2 |
160 | 1.25Mpa | 3.1 | 8 | 160 | 1.25Mpa | 3.1 | 8 |
160 | 1.6Mpa | 3.1 | 10 | 160 | 1.6Mpa | 3.1 | 10 |
180 | 1.0Mpa | 3.1 | 7.5 | 180 | 1.0Mpa | 3.1 | 7.5 |
180 | 1.25Mpa | 3.1 | 9 | 180 | 1.25Mpa | 3.1 | 9 |
180 | 1.6Mpa | 3.1 | 10.7 | 180 | 1.6Mpa | 3.1 | 10.7 |
200 | 1.0Mpa | 3.1 | 7.5 | 200 | 1.0Mpa | 3.1 | 7.5 |
200 | 1.25Mpa | 3.1 | 9.6 | 200 | 1.25Mpa | 3.1 | 9.6 |
200 | 1.6Mpa | 3.1 | 11.9 | 200 | 1.6Mpa | 3.1 | 11.9 |
225 | 1.0Mpa | 3.1 | 7.5 | 225 | 1.0Mpa | 3.1 | 7.5 |
225 | 1.25Mpa | 3.1 | 10 | 225 | 1.25Mpa | 3.1 | 10 |
225 | 1.6Mpa | 3.1 | 13.4 | 225 | 1.6Mpa | 3.1 | 13.4 |
250 | 1.0Mpa | 3.1 | 7.5 | 250 | 1.0Mpa | 3.1 | 7.5 |
250 | 1.25Mpa | 3.1 | 9.6 | 250 | 1.25Mpa | 3.1 | 9.6 |
250 | 1.6Mpa | 3.1 | 11.9 | 250 | 1.6Mpa | 3.1 | 11.9 |
250 | 2.0Mpa | 3.1 | 14.8 | 250 | 2.0Mpa | 3.1 | 14.8 |
268 | 1.0Mpa | 3.1 | 10 | 268 | 1.0Mpa | 3.1 | 10 |
315 | 1.0Mpa | 3.1 | 10 | 315 | 1.0Mpa | 3.1 | 10 |
Composite tube 160 | 3.1 | 10 | Composite tube 160 | 3.1 | 10 | ||
Composite tube 170 | 3.1 | 12 | Composite tube 170 | 3.1 | 12 | ||
Length including thread 100mm | Length including thread 100mm |
pvc-m | pvc-a | pvc-u | ||||||||||
Type | Pressure | Thickness | Type | Pressure | Thickness | Type | Pressure | Thickness | Type | Pressure | Thickness | |
50 | 0.8 | 2 | 150 | 0.8 | 4.3 | 50 | 0.8 | 2 | 50 | 0.8 | 2 | |
50 | 1 | 2.4 | 150 | 1 | 5 | 50 | 1 | 2.4 | 50 | 1 | 2.4 | |
50 | 1.25 | 3 | 160 | 0.6 | 3.2 | 50 | 1.25 | 3 | 50 | 1.25 | 3 | |
63 | 0.6 | 2 | 160 | 0.8 | 4.5 | 63 | 0.6 | 2 | 63 | 0.6 | 2 | |
63 | 0.8 | 2.5 | 160 | 1 | 6.2 | 63 | 0.8 | 2.5 | 63 | 0.8 | 2.5 | |
63 | 1 | 3 | 160 | 1.25 | 8 | 63 | 1 | 3 | 63 | 1 | 3 | |
75 | 0.6 | 2.3 | 160 | 1.6 | 10 | 75 | 0.6 | 2.3 | 75 | 0.6 | 2.3 | |
75 | 0.8 | 2.9 | 180 | 0.6 | 3.5 | 75 | 0.8 | 2.9 | 75 | 0.8 | 2.9 | |
75 | 1 | 3.6 | 180 | 0.8 | 5 | 75 | 1 | 3.6 | 75 | 1 | 3.6 | |
90 | 0.6 | 2.3 | 180 | 1 | 6 | 90 | 0.6 | 2.8 | 90 | 0.6 | 2.8 | |
90 | 0.8 | 3.5 | 180 | 1.25 | 7.5 | 90 | 0.8 | 3.5 | 90 | 0.8 | 3.5 | |
90 | 1 | 4.3 | 200 | 0.6 | 3.5 | 90 | 1 | 4.3 | 90 | 1 | 4.3 | |
110 | 0.6 | 2.4 | 200 | 0.8 | 5 | 110 | 0.6 | 2 | 110 | 0.6 | 2.5 | |
110 | 0.8 | 3.2 | 200 | 1 | 6 | 110 | 0.6 | 2.5 | 110 | 0.8 | 3.2 | |
110 | 1 | 4 | 200 | 1.25 | 7.5 | 110 | 0.8 | 3.3 | 110 | 1 | 4.2 | |
110 | 1.25 | 5 | 200 | 1.6 | 9.6 | 110 | 1 | 4 | 120 | 0.6 | 2.5 | |
120 | 0.6 | 2.5 | 219 | 0.6 | 3.5 | 120 | 0.6 | 2 | 120 | 0.8 | 3.4 | |
120 | 0.8 | 3.4 | 219 | 0.8 | 4 | 120 | 0.6 | 2.5 | 120 | 1 | 4.2 | |
120 | 1 | 4.3 | 219 | 1 | 5 | 120 | 0.8 | 3.4 | 125 | 0.6 | 2.5 | |
120 | 1.25 | 5.5 | 219 | 1.25 | 7.5 | 120 | 1 | 4.2 | 125 | 0.8 | 3.4 | |
125 | 0.6 | 2.5 | 225 | 0.6 | 4 | 125 | 0.6 | 2 | 125 | 0.8 | 4.2 | |
125 | 0.8 | 3.4 | 225 | 0.8 | 5 | 125 | 0.6 | 2.5 | 140 | 0.6 | 2.8 | |
125 | 1 | 4.2 | 225 | 1 | 6 | 125 | 0.8 | 3.4 | 140 | 0.8 | 4 | |
125 | 1.25 | 4.8 | 225 | 1.25 | 7.5 | 125 | 1 | 4.2 | 140 | 1 | 5 | |
125 | 1.6 | 5.5 | 250 | 0.6 | 4 | 140 | 0.6 | 2.8 | 160 | 0.6 | 3.2 | |
130 | 0.6 | 2.8 | 250 | 1 | 5 | 140 | 0.8 | 4 | 160 | 0.8 | 4.5 | |
140 | 0.6 | 2.8 | 250 | 1.25 | 6 | 160 | 0.6 | 3.2 | 160 | 1 | 6.2 | |
140 | 0.8 | 4 | 250 | 1.6 | 7.5 | 160 | 0.8 | 4.5 | 180 | 0.6 | 3.5 | |
140 | 1 | 5 | 315 | 0.6 | 5 | 180 | 0.6 | 3.5 | 180 | 0.8 | 5 | |
140 | 1.25 | 6 | 315 | 1 | 7.5 | 180 | 0.8 | 5 | 180 | 1 | 6 | |
150 | 0.6 | 2.7 | 315 | 1.25 | 15 | 200 | 0.6 | 3.5 | 180 | 1.25 | 7.5 | |
200 | 0.8 | 5 | 200 | 0.6 | 3.5 | |||||||
200 | 0.8 | 5 | ||||||||||
200 | 1 | 6 | ||||||||||
200 | 1.25 | 7.5 | ||||||||||
219 | 0.6 | 4 | ||||||||||
219 | 0.8 | 5 | ||||||||||
219 | 1 | 6 | ||||||||||
219 | 1.25 | 7.5 | ||||||||||
225 | 0.6 | 4 | ||||||||||
225 | 0.8 | 5 | ||||||||||
225 | 1 | 6 | ||||||||||
225 | 1.25 | 7.5 | ||||||||||
250 | 0.6 | 5 | ||||||||||
250 | 0.8 | 6 | ||||||||||
250 | 1 | 7.5 | ||||||||||
315 | 0.6 | 5 | ||||||||||
315 | 0.8 | 7.5 |
1. Are you a trading company or a manufacturer?
We are a professional manufacturer. Our factory mainly produces water well drilling rigs, core drilling rigs, down-the-hole drilling rigs, pile drivers, etc. The products have been exported to hundreds of countries around the world and enjoy a high reputation all over the world.
2.How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video inspection.
3.How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 15-20 days.
3) In the case of customization, we can deliver the machine within 25-30 days.
4. What's your terms of payment?
T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.